ZANHO HRC55-2S-55013 End mill D5×50 mm
Code: HRC55-2S-55013Brand: ZANHOSeries: HRC55-2S
Photo and drawing

Series drawing from the ZANHO manufacturer catalog. Dimensions of this item are in the specifications table.
Specifications
| Cutting diameter(D) | 5 mm |
| Cutting length(L1) | 13 mm |
| Shank diameter(D1) | 5 mm |
| Overall length(L) | 50 mm |
| Number of flutes | 2 |
| End type | square end |
| Helix angle | 30° |
| Coating | TiSiN |
| Max workpiece hardness | ≤ 45 HRC |
| Catalog designation | D5*D5*50L*2F |
Workpiece materials
- Psteel◎ very suitable
- Kcast iron○ suitable
Other sizes in series HRC55-2S
- HRC55-2S-01003ZANHO HRC55-2S-01003 End mill D1×50 mm
- HRC55-2S-01505ZANHO HRC55-2S-01505 End mill D1.5×50 mm
- HRC55-2S-02006ZANHO HRC55-2S-02006 End mill D2×50 mm
- HRC55-2S-02507ZANHO HRC55-2S-02507 End mill D2.5×50 mm
- HRC55-2S-03008ZANHO HRC55-2S-03008 End mill D3×50 mm
- HRC55-2S-33008ZANHO HRC55-2S-33008 End mill D3×50 mm
- HRC55-2S-03508ZANHO HRC55-2S-03508 End mill D3.5×50 mm
- HRC55-2S-04010ZANHO HRC55-2S-04010 End mill D4×50 mm
- HRC55-2S-05013ZANHO HRC55-2S-05013 End mill D5×50 mm
- HRC55-2S-06015ZANHO HRC55-2S-06015 End mill D6×50 mm
- HRC55-2S-08020ZANHO HRC55-2S-08020 End mill D8×60 mm
- HRC55-2S-10025ZANHO HRC55-2S-10025 End mill D10×75 mm