ZANHO HRC55-4S-10030 End mill D10×75 mm
Code: HRC55-4S-10030Brand: ZANHOSeries: HRC55-4S
Photo and drawing

Series drawing from the ZANHO manufacturer catalog. Dimensions of this item are in the specifications table.
Specifications
| Cutting diameter(D) | 10 mm |
| Cutting length(L1) | 30 mm |
| Shank diameter(D1) | 10 mm |
| Overall length(L) | 75 mm |
| Number of flutes | 4 |
| End type | square end |
| Helix angle | 35° |
| Coating | TiSiN |
| Max workpiece hardness | ≤ 45 HRC |
| Catalog designation | D10*D10*75L*4F |
Workpiece materials
- Psteel◎ very suitable
- Kcast iron○ suitable
Other sizes in series HRC55-4S
- HRC55-4S-01003ZANHO HRC55-4S-01003 End mill D1×50 mm
- HRC55-4S-61003ZANHO HRC55-4S-61003 End mill D1×50 mm
- HRC55-4S-01505ZANHO HRC55-4S-01505 End mill D1.5×50 mm
- HRC55-4S-61505ZANHO HRC55-4S-61505 End mill D1.5×50 mm
- HRC55-4S-02006ZANHO HRC55-4S-02006 End mill D2×50 mm
- HRC55-4S-62006ZANHO HRC55-4S-62006 End mill D2×50 mm
- HRC55-4S-02507ZANHO HRC55-4S-02507 End mill D2.5×50 mm
- HRC55-4S-62507ZANHO HRC55-4S-62507 End mill D2.5×50 mm
- HRC55-4S-03009ZANHO HRC55-4S-03009 End mill D3×50 mm
- HRC55-4S-33009ZANHO HRC55-4S-33009 End mill D3×50 mm
- HRC55-4S-63009ZANHO HRC55-4S-63009 End mill D3×50 mm
- HRC55-4S-03511ZANHO HRC55-4S-03511 End mill D3.5×50 mm