ZANHO S400-4S-02006 End mill D2×50 mm
Code: S400-4S-02006Brand: ZANHOSeries: S400-4S
Photo and drawing

Series drawing from the ZANHO manufacturer catalog. Dimensions of this item are in the specifications table.
Specifications
| Cutting diameter(D) | 2 mm |
| Cutting length(L1) | 6 mm |
| Shank diameter(D1) | 4 mm |
| Overall length(L) | 50 mm |
| Number of flutes | 4 |
| End type | square end |
| Helix angle | 36° |
| Coating | AlCrN |
| Max workpiece hardness | ≤ 55 HRC |
| Catalog designation | D2*D4*50L*4F |
Workpiece materials
- Psteel◎ very suitable
- Mstainless steel◎ very suitable
- Kcast iron◎ very suitable
- Sheat-resistant alloys, titanium◎ very suitable
- Hhardened steel○ suitable
Other sizes in series S400-4S
- S400-4S-01003ZANHO S400-4S-01003 End mill D1×50 mm
- S400-4S-01505ZANHO S400-4S-01505 End mill D1.5×50 mm
- S400-4S-02507ZANHO S400-4S-02507 End mill D2.5×50 mm
- S400-4S-03009ZANHO S400-4S-03009 End mill D3×50 mm
- S400-4S-33009ZANHO S400-4S-33009 End mill D3×50 mm
- S400-4S-63009ZANHO S400-4S-63009 End mill D3×50 mm
- S400-4S-03511ZANHO S400-4S-03511 End mill D3.5×50 mm
- S400-4S-04012ZANHO S400-4S-04012 End mill D4×50 mm
- S400-4S-64012ZANHO S400-4S-64012 End mill D4×50 mm
- S400-4SH-04016ZANHO S400-4SH-04016 End mill D4×75 mm
- S400-4SH-04020ZANHO S400-4SH-04020 End mill D4×100 mm
- S400-4S-55015ZANHO S400-4S-55015 End mill D5×50 mm