ZANHO UP100-4S-08020 End mill D8×60 mm
Code: UP100-4S-08020Brand: ZANHOSeries: UP100-4S
Photo and drawing

Series drawing from the ZANHO manufacturer catalog. Dimensions of this item are in the specifications table.
Specifications
| Cutting diameter(D) | 8 mm |
| Cutting length(L1) | 20 mm |
| Shank diameter(D1) | 8 mm |
| Overall length(L) | 60 mm |
| Number of flutes | 4 |
| End type | square end |
| Helix angle | 35° |
| Coating | AlCrN |
| Max workpiece hardness | ≤ 45 HRC |
| Catalog designation | D8*D8*60L*4F |
Workpiece materials
- Psteel◎ very suitable
- Mstainless steel○ suitable
- Kcast iron○ suitable
Other sizes in series UP100-4S
- UP100-4S-01003ZANHO UP100-4S-01003 End mill D1×50 mm
- UP100-4S-61003ZANHO UP100-4S-61003 End mill D1×50 mm
- UP100-4S-01505ZANHO UP100-4S-01505 End mill D1.5×50 mm
- UP100-4S-61505ZANHO UP100-4S-61505 End mill D1.5×50 mm
- UP100-4S-02006ZANHO UP100-4S-02006 End mill D2×50 mm
- UP100-4S-62006ZANHO UP100-4S-62006 End mill D2×50 mm
- UP100-4S-02507ZANHO UP100-4S-02507 End mill D2.5×50 mm
- UP100-4S-62507ZANHO UP100-4S-62507 End mill D2.5×50 mm
- UP100-4S-03009ZANHO UP100-4S-03009 End mill D3×50 mm
- UP100-4S-33009ZANHO UP100-4S-33009 End mill D3×50 mm
- UP100-4S-63009ZANHO UP100-4S-63009 End mill D3×50 mm
- UP100-4S-03511ZANHO UP100-4S-03511 End mill D3.5×50 mm