Tap drill for M27
M27 (3 mm pitch) takes a 24 mm drill. Fine pitch M27×2 — 25 mm.
M27 pitches and drill sizes
| Thread | Pitch, mm | Cutting tap drill, mm | Forming tap, mm |
|---|---|---|---|
| M27 coarse | 3 | 24 | — |
| M27×2 fine | 2 | 25 | — |
D − P = 27 − 3 = 24 mm, rounded to 24 mm.
24 mm carbide drills in the catalog
No drills of exactly 24 mm in the catalog — see all carbide drills or send a request.
All carbide drillsFAQ
- What drill for M27?
- M27 with a 3 mm pitch takes a 24 mm drill.
- What drill for M27×2?
- M27×2 with a 2 mm pitch takes a 25 mm drill.