Tap drill sizes: chart for metric threads

The tap drill for a metric thread is the major diameter minus the pitch: D − P. M6 (1 mm pitch) needs a 5 mm drill, M8 — 6.8 mm, M10 — 8.5 mm, M12 — 10.2 mm. A forming tap needs a larger hole: about D − P/2.

ThreadPitch, mmCutting tap drill, mmForming tap, mm
M2coarse0.41.61.8
M2.5coarse0.452.052.3
M3coarse0.52.52.8
M4coarse0.73.33.7
M5coarse0.84.24.6
M5×0.5fine0.54.54.8
M6coarse155.5
M6×0.75fine0.755.25.6
M8coarse1.256.87.4
M8×1fine177.5
M10coarse1.58.59.3
M10×1.25fine1.258.89.4
M10×1fine199.5
M12coarse1.7510.211.2
M12×1.5fine1.510.511.3
M12×1.25fine1.2510.811.4
M14coarse21213
M14×1.5fine1.512.513.3
M16coarse21415
M16×1.5fine1.514.515.3
M18coarse2.515.5—
M18×1.5fine1.516.5—
M20coarse2.517.5—
M20×1.5fine1.518.5—
M22coarse2.519.5—
M22×1.5fine1.520.5—
M24coarse321—
M24×2fine222—
M27coarse324—
M27×2fine225—
M30coarse3.526.5—
M30×2fine228—

How to choose a tap drill

  • Cutting tap: drill = D − P, where D is the thread diameter and P the pitch. M8 × 1.25: 8 − 1.25 = 6.75, rounded to 6.8 mm.
  • Forming tap: the metal is displaced, so the hole is larger, about D − P/2. M8 — 7.4 mm.
  • The pitch is in the designation: M10 × 1.25 is a fine 1.25 mm pitch. Without a pitch (M10) it is the coarse one, 1.5 mm.
  • For gummy materials (stainless steel, aluminium) the drill is often 0.1 mm larger. The tap maker’s catalog has the final word.
  • For thread milling, drill the same hole as for a cutting tap.

FAQ

What drill for M6?
M6 with a 1 mm pitch takes a 5 mm drill. For a forming tap — 5.5 mm.
What drill for M8?
M8 with a 1.25 mm pitch takes a 6.8 mm drill. For a forming tap — 7.4 mm.
What drill for M10?
M10 with a 1.5 mm pitch takes a 8.5 mm drill. For a forming tap — 9.3 mm.
What drill for M12?
M12 with a 1.75 mm pitch takes a 10.2 mm drill. For a forming tap — 11.2 mm.
What drill for M5?
M5 with a 0.8 mm pitch takes a 4.2 mm drill. For a forming tap — 4.6 mm.
What drill for M4?
M4 with a 0.7 mm pitch takes a 3.3 mm drill. For a forming tap — 3.7 mm.
Tap drill size chart for metric threads | ТехПромРез